Tel: +86-18626211424

Olleo Blog

How Chairs Are Packed for Container Shipping: A CBM Guide for European Buyers

If you buy upholstered chairs from China, the moment your order leaves the factory floor it becomes a shipping problem: 100 to 800 cartons, stacked inside a steel box for four to six weeks at sea. Packing and container planning decide whether your chairs arrive showroom-ready or arrive as a claim. This guide covers how an Anji chair factory packs upholstered seating, how carton specs are agreed, and how to calculate CBM for your next 20ft or 40ft booking.

Why Export Packing Deserves More Attention

Most quality problems reported by European importers do not come from the chair itself. They come from what happens around it: a carton crushed under three others, moisture creeping through a container wall, a leg puncturing a neighbour's packaging. When your MOQ is 100 pieces per model, a single damaged carton of six chairs is already a visible loss.

Good export packing solves four problems at once:

  • Compression: cartons must survive being stacked to container height, often five or six layers high.

  • Abrasion: frames and metal parts rub against each other in transit; every contact point needs a barrier.

  • Moisture: sea containers see humidity swings from tropical summers to northern European winters.

  • Handling: cartons get fork-lifted, clamped, dropped and re-stacked at least four times between the factory and your warehouse.

Inside the Packing Line: From Polybag to Master Carton

At Olleo Furniture, packing is the last station of the production line, and it follows a fixed sequence so that nothing depends on the packer's mood that day:

  1. Each chair is inspected against the approved golden sample, then fitted with a foam or bubble sleeve on the frame and corners.

  2. Seats and backs are wrapped in PE bags to keep upholstery clean and dry.

  3. Legs, bases and hardware are bagged separately and fixed inside the carton so they cannot migrate during transit.

  4. The chair goes into a five-layer export master carton with internal partitions where the design needs them.

  5. Cartons are sealed, labelled with model number, quantity, carton number and shipping marks.

  6. Finally, cartons are stacked on pallets or floor-loaded directly into the container, depending on the agreed packing instruction.

Every carton leaves with an assembly instruction sheet inside, because most of our EU clients order flat-packed (knock-down) models to keep freight cost per chair down.

Carton Specs: What to Agree Before Production

Packing is a specification, not an afterthought. Before the sample is approved, agree these points with your supplier in writing:

  • Carton material: five-layer K=K double-wall corrugated board is the export standard for seating; lighter grades are for domestic moves only.

  • Carton dimensions: driven by the chair's knock-down size, but optimised so cartons interlock when stacked.

  • Gross weight per carton: typically 12–18 kg for dining chairs packed six per carton; keep it within your warehouse team's handling limits.

  • Labelling: shipping marks, model/SKU, quantity per carton and country of origin must match your packing list exactly.

  • Packing method: floor-loaded, slip-sheet or palletised — it changes both freight cost and unload time.

stacked export cartons with fragile labels ready for chair container shippingThese details feed the packing list that customs and your forwarder will check at both ends.

CBM Explained: The Simple Math Behind Your Freight Budget

CBM — cubic metres — is the language your forwarder speaks. The formula is basic:

CBM per carton = length × width × height (metres)

Take a typical flat-packed dining chair carton of 0.62 × 0.62 × 0.75 m holding six chairs. One carton is about 0.288 CBM, so each chair occupies roughly 0.048 CBM. From there, planning is arithmetic:

ModelPcs/cartonCarton size (m)CBM/cartonCBM/100 pcs
Dining chair (KD)60.62 × 0.62 × 0.750.2884.8
Bar stool (KD)40.50 × 0.45 × 0.850.1914.8
Lounge chair (assembled)10.70 × 0.68 × 0.820.39039.0

The last column shows why knock-down packing dominates European chair imports: assembled chairs can take four to eight times more container space.

How Many Chairs Fit in a 20ft and 40ft Container

A 20ft container offers about 28 usable CBM, a 40ft container about 58 CBM, and a 40ft high-cube about 68 CBM. But usable volume is not loading volume — cartons never fill a container perfectly. Plan with a fill factor of roughly 85–90%.

  • 20ft: ~5,000 dining chairs floor-loaded (roughly 830 cartons of six).

  • 40ft: ~10,500 dining chairs, or a mixed load of chairs plus a few sofa cartons.

  • 40ft HC: up to ~12,000 dining chairs — useful when unit value is low and freight cost per chair decides the deal.

Remember weight limits too: a 20ft container maxes out around 21–24 tonnes of cargo depending on the carrier, so heavy fully-upholstered lounge models may hit the weight ceiling before the space ceiling. Your forwarder confirms exact limits per routing.

Loading Day: Floor-Loaded or Palletised?

There are two ways to stuff a container, and the right answer depends on what happens when it arrives at your side.

  • Floor-loading: cartons are stacked directly from floor to ceiling. Maximum use of space, lowest freight cost per chair — but your warehouse needs the labour and time to hand-unload.

  • Palletised: cartons are stacked on pallets, wrapped, and loaded with a forklift. Faster unloading, easier onward distribution to your DC or 3PL, but pallets consume roughly 10–15% of container space.

workers loading a shipping container with cargo at the portOn loading day, keep the packing list with the container, photograph the seal number, and shoot a few photos of the loaded interior — the first evidence if a claim ever opens.

stacked wooden pallets outside a warehouse ready for furniture exportFor palletised loads, make sure pallets are ISPM 15 treated and that pallet heights fit your own racking — a detail buyers regret only after the container lands.

FAQ

1. How is CBM charged for LCL shipments?
For LCL freight, forwarders charge by the greater of weight or volume: 1 CBM or 1,000 kg. For a trial order of 100 chairs (about 4.8 CBM for KD dining chairs), LCL is workable, but the per-CBM rate is noticeably higher than FCL — most buyers switch to a 20ft container from around 6–8 CBM of cargo.

2. Do you pack according to our carton design and labels?
Yes. As an OEM/ODM factory we pack to your carton spec: your artwork, your shipping marks, your barcode labels. Send the dieline with the order and we will run a pre-production carton sample for approval.

3. Can I mix several chair models in one container?
Absolutely — most of our EU clients do. Since MOQ is 100 pieces per model and colours can be mixed within the same model, a single 40ft container can carry a full season: dining chairs, bar stools and lounge models loaded together, with a loading plan we share before loading day.

Plan Your Next Shipment with Real Numbers

Packing and CBM planning are not glamorous, but they protect margin on every order. When you request a quote, give us your target quantity and destination port and we will reply within 24 hours with carton dimensions, loadability for 20ft/40ft, and FOB Ningbo or Shanghai pricing — production lead time 35 days from order confirmation. Browse our upholstered dining chairs and bar stools to shortlist models, check our guide to choosing the right trade term, and contact the Olleo team to get a loading plan for your next order.

Categories

Contact Us

Contact: Olleo Furniture

Phone: +86-18626211424

E-mail: info@olleofurniture.com

Whatsapp:+86-18626211424

Add: Room 301, Building A, No. 6 Weixin Road, Suzhou Industrial Park, Jiangsu Province, China